首页

Post processor information

QTE’s experience of 35 years has shown us that there is seldom a perfect library post processor since nearly every customer desires some form of Post modification. This is usually due to individual CNC machine parameters, different company standards or operator preferences. Each post processor in our library has been modified to meet a customer specification and when a new modification is made the file is added to our library. Since each customer often requests a slightly different modification, the library post may not be perfect for your machine. Due to this we have established the following Post Processor Policy to clarify for all of our customers. If you have any questions contact盛兴彩票导航 at .

  • Edited NC Code generated from the part included in the Zip2Go from above. This edited code should clearly mark the areas where changes are needed and should be tested and proven in the machine. (Note: The edited NC Code is not included in the Z2G file. It will need to be attached separately.)
  • Additional Information is not required but could be helpful. Please include relevant information as deemed necessary to assist in a timely turnaround of the post modifications:
    • Programming Manual for the machine (very helpful for extensive changes)
    • Additional sample code or programs that illustrate correct formatting
    • G and M code list if custom codes or cycles are being used
  • Note: QTE may request the completion of a full post processor form to obtain detailed machine specific information if we do not have it on hand through previous custom development.

    Post edits and requests should be sent to [email protected]